Shortened Main Bar

Description

The main bar of the Gym1 Core Unit (parts 3 and 4)  shortened to 34″ (86.36cm) to fit narrow hallways and corner doorway situations.

Save yourself time and money by cutting the ends of the main bar yourself:

If you are handy or know someone who is handy, you can save some time and money by just trimming an inch or two as needed from each side of the main 38 inch bar to make it fit your unique corner doorway or narrow hallway situation. Just take out the plastic end cap, trim with a sawzall or similar device. Sand the cut ends a bit if you wish and replace the blue plastic end cap–the whole cutting process usually takes only 10-20 seconds with a sawzall. For very unique situations you might have to cut asymmetrically i.e. 2 inches off on one side and 3 inches off the other side etc.. But always keep in mind that the blue motion stabilizers are in a fixed position to keep the swing and other attachments centered in the middle of the doorway so a one inch differential one side or the other won’t make a big difference.